Citadel Warthog 12ga Barrel Seals (4 Pack)
SKU:
CTWart12ga-4pk
$10.99
$10.99
per item
- Replacement o-ring for Citadel Warthog 12 Gauge
- Highest grade synthetic rubber o-rings replace old, worn, or cracked orings to provide a proper seal and restore gas system reliability.
- Used to resolve blow back issues with 12 gauge gas ports in your Warthog shotgun.
- Material has high temperature, compression, and operational tolerances. Up to 316 C (600 F) and down to -54 C (-65 F).
Replacement o-ring for Citadel Warthog 12 Gauge. Highest grade synthetic rubber o-rings replace old, worn, or cracked orings to provide a proper seal and restore gas system reliability. Used to resolve blow back issues with 12 gauge gas ports in your Warthog shotgun. Material has high temperature, compression, and operational tolerances. Up to 316 C (600 F) and down to -54 C (-65 F).
O-Rings measure approximately 1" inside diameter x 1.125" outside diameter.
Important Note:
The majority of 12ga Warthog models use this o-ring size. However, some of them use a thicker o-ring. There is no rhyme or reason to the serial numbers for the ones that use the thicker o-ring. Please measure your old o-ring to confirm it is approximately 1” inside diameter and about 1-1/8" outside diameter (approximately 1/16" thick) thick to ensure this is the o-ring to fit your Warthog.
If you've confirmed that you need the larger/thicker o-ring, you can find it at the link below:
O-Rings measure approximately 1" inside diameter x 1.125" outside diameter.
Important Note:
The majority of 12ga Warthog models use this o-ring size. However, some of them use a thicker o-ring. There is no rhyme or reason to the serial numbers for the ones that use the thicker o-ring. Please measure your old o-ring to confirm it is approximately 1” inside diameter and about 1-1/8" outside diameter (approximately 1/16" thick) thick to ensure this is the o-ring to fit your Warthog.
If you've confirmed that you need the larger/thicker o-ring, you can find it at the link below:
