Skip to product information
image_16
1/8
  • image_16
  • image_17
  • image_18
  • image_19
  • image_20
  • image_21
  • image_22
  • image_23
3M 68898-32 O-Ring (AP801, AP801-C. AP802) [3 Pack]

3M 68898-32 O-Ring (AP801, AP801-C. AP802) [3 Pack]

$11.79
In Stock. Ships within one business day.
  • Includes 3 replacement 68898-32 (also called 68898-31) o-rings to repair your leaking water filter housing
  • Fits Housings: 3M AP801, 3M AP801-C, 3M AP802, (Not for the newer 3M AP801B/T or AP802B/T), KemFlo 5000 Series, KemFlo 10,000 Series, Keystone CG10.
  • Replace your O-Ring with every 3rd filter change to prevent leaks
  • O-Ring is approximately 5.6" Inside Diameter x 0.215" Thickness
  • Molded from NSF 61 certified buna-n rubber for safe and clean drinking water. Manufactured and warrantied by Captain O-Ring LLC. Proudly assembled in the USA!
Part Number 68898-32 (also called 68898-31)
Filter Housing Compatibility 3M AP801, 3M AP801-C, 3M AP802, (Not for the newer 3M AP801B/T or AP802B/T), KemFlo 5000 Series, KemFlo 10,000 Series, Keystone CG10
O-Ring Inside Diameter 5.6 inches
O-Ring Thickness 0.215 inches
Material Buna Nitrile Rubber
Grease/Lubricant Compatibility No grease required. Simply wet the o-rings with water then install. Compatible with silicone and petroleum based greases if desired.
Contents (What To Expect) Three (3) o-rings in Captain O-Ring branded packaging.

 

Captain O-Ring's replacement 68898-32 (also called 68898-31) o-rings are compatible with the following filter housings:

  • 3M AP801
  • 3M AP801-C
  • 3M AP802
  • (Does not fit the newer 3M AP801B/T or AP802B/T housings, see below)
  • KemFlo 5000 Series
  • KemFlo 10,000 Series
  • Keystone CG10

Important Note #1: Does your filter housing use a square/flat gasket rather than a round o-ring?

Some of the older 3M AP801 models use a flat (squared-off) gasket rather than the round o-ring. These housings use the 68898-31 gasket rather than the newer 68898-32 o-ring. If you need the flat 68898-31 gasket, you can click here.

Important Note #2: Do you have one of the newer 3M AP801B, AP801T, AP802B, AP802T housings?

The newer 3M Aqua Pure AP801B/T and AP802B/T housings use the newer 3M #70-0203-5277-2 o-ring. It is slightly smaller in diameter than the older 3M 68898-32 o-ring. If you have one of the newer 3M AP801B, AP801T, AP802B, or AP802T filter housings, you can click here find your o-ring gasket.

You may also like