Charles Daly Semi-Auto 12 Gauge Barrel Seal O-Rings [4 Pack]
SKU:
B5-XB63-2C2B
$9.99
$9.99
per item
- Replacement o-ring for most Charles Daly Semi-Auto 12 gauges (see note in description regarding size).
- Highest grade synthetic rubber (graphite coated) o-rings replace old, worn, or cracked orings to provide a proper seal and restore gas system reliability.
- Used to resolve blow back issues with gas ports for Charles Daly Semi-Auto 12ga models. Please see note in product description regarding o-ring size/thickness to ensure this o-ring fits your Charles Daly 12 gauge.
- Material has high temperature, compression, and operational tolerances. Up to 316 C (600 F) and down to -54 C (-65 F).
This is the one you've been searching for. Now sold in a 4 pack for the price of 3! This is the barrel seal for most Charles Daly 12ga models.
Synthetic rubber and fluoropolymer elastomer, coated in graphite. These replacement o-rings are an exact match to the barrel seals included in your model when it came off the assembly line. This is the superior material for the gas system barrel seal, the same material used by when your unit was new. Don't trust inferior materials used in many aftermarket parts, with lower temperature specs and less chemical resistance. These synthetic o-rings will hold up against solvents used to clean your Charles Daly 12ga, as well as perform flawlessly up to 600 F.
What to expect:
This item includes four (4) Remington 1100 (same as Winchester Super-X Model 1, and Charles Daly) Replacement Barrel Seals in a resealable zip-top poly bag with "Captain O-Ring" branded packaging.
Important Note:
The majority of Charles Daly 12ga models use this o-ring size (the same as the Remington 1100/11-87 12ga). However, a few of them use a thicker o-ring. There is no rhyme or reason to the serial numbers for the few that use the thicker o-ring. Please measure your old o-ring to confirm it is approximately 1” diameter and about 1/16” thick to ensure this is the o-ring to fit your Charles Daly model.
Manufactured and warrantied against defect for one year by Captain O-Ring LLC. "Captain O-Ring" is a registered trademark of Captain O-Ring LLC. Proudly assembled in the USA!
Synthetic rubber and fluoropolymer elastomer, coated in graphite. These replacement o-rings are an exact match to the barrel seals included in your model when it came off the assembly line. This is the superior material for the gas system barrel seal, the same material used by when your unit was new. Don't trust inferior materials used in many aftermarket parts, with lower temperature specs and less chemical resistance. These synthetic o-rings will hold up against solvents used to clean your Charles Daly 12ga, as well as perform flawlessly up to 600 F.
What to expect:
This item includes four (4) Remington 1100 (same as Winchester Super-X Model 1, and Charles Daly) Replacement Barrel Seals in a resealable zip-top poly bag with "Captain O-Ring" branded packaging.
Important Note:
The majority of Charles Daly 12ga models use this o-ring size (the same as the Remington 1100/11-87 12ga). However, a few of them use a thicker o-ring. There is no rhyme or reason to the serial numbers for the few that use the thicker o-ring. Please measure your old o-ring to confirm it is approximately 1” diameter and about 1/16” thick to ensure this is the o-ring to fit your Charles Daly model.
Manufactured and warrantied against defect for one year by Captain O-Ring LLC. "Captain O-Ring" is a registered trademark of Captain O-Ring LLC. Proudly assembled in the USA!
