O-Rings for Simpure DB10C Filter Housing (2 Sets, 4 O-Rings)
SKU:
DB10C-OR2x
$13.29
$13.29
per item
- Compatible with Simpure DB10C. NOT compatible with any other models within the DB series (Not for DB10/20 or DB10P).
- The DB10C uses two o-rings to seal the canister to the filter head. The thicker o-ring goes in the groove around the outer circumference of the canister (just above the threads), and the thinner o-ring sits in the groove at the top of the canister sump. See photos for details.
- Package contains 2 sets of o-rings, 4 o-rings total. Replace your DB10C’s old, worn, or leaking o-ring seal gaskets and have a spare set to keep on hand for the future.
- Molded from NSF61 compliant rubber for safe and clean drinking water.
Get your leaking filter housing back in working order with Captain O-Ring’s replacement o-rings for the Simpure DB10C.
IMPORTANT: These o-rings are only compatible with the DB10C (not for the DB10/20 or DB10P).
The DB10C uses two o-rings to seal the canister to the filter head. The thicker o-ring goes in the groove around the outer circumference of the canister (just above the threads). The thinner o-ring sits in the groove at the top of the canister sump. Check out the photos for an example of where each of the two different o-ring sizes go.
This package includes 2 sets of o-rings - 4 o-rings total. This allows you to replace your DB10C’s old, worn, or leaking o-ring seal gaskets and have a spare set to keep on hand for the future.
It is recommended to replace your o-rings every third filter change to prevent leaks. O-Rings do not require lubrication, and can simply be wet with water to install. However, if you’d like to use lubrication, these Buna-N o-rings are compatible with all common plumbing greases (100% silicone grease is most often used in this application).
Molded from NSF61 compliant Buna-N rubber for safe and clean drinking water.
Manufactured and warrantied by Captain O-Ring LLC. Proudly assembled in the USA!
IMPORTANT: These o-rings are only compatible with the DB10C (not for the DB10/20 or DB10P).
The DB10C uses two o-rings to seal the canister to the filter head. The thicker o-ring goes in the groove around the outer circumference of the canister (just above the threads). The thinner o-ring sits in the groove at the top of the canister sump. Check out the photos for an example of where each of the two different o-ring sizes go.
This package includes 2 sets of o-rings - 4 o-rings total. This allows you to replace your DB10C’s old, worn, or leaking o-ring seal gaskets and have a spare set to keep on hand for the future.
It is recommended to replace your o-rings every third filter change to prevent leaks. O-Rings do not require lubrication, and can simply be wet with water to install. However, if you’d like to use lubrication, these Buna-N o-rings are compatible with all common plumbing greases (100% silicone grease is most often used in this application).
Molded from NSF61 compliant Buna-N rubber for safe and clean drinking water.
Manufactured and warrantied by Captain O-Ring LLC. Proudly assembled in the USA!
