25x3mm O-Rings (3-Pack, for 12ga Citadel Warthogs that use larger o-rings)
SKU:
25x3VT75-3pk
$12.00
$12.00
per item
- Some 12ga Citadel Warthog models use a larger/thicker o-ring than most.
- Only purchase this o-ring if you know your Warthog uses the larger/thicker o-ring.
- Highest grade synthetic rubber o-rings replace old, worn, or cracked orings to provide a proper seal and restore gas system reliability.
- Used to resolve blow back issues with 12 gauge gas ports in your Warthog shotgun.
- Material has high temperature, compression, and operational tolerances. Up to 316 C (600 F) and down to -54 C (-65 F).
The majority of 12ga Warthog models use the standard size o-ring. However, some of them use a thicker o-ring. There is no rhyme or reason to the serial numbers for the ones that use the thicker o-ring. Please measure your old o-ring to confirm it's size. The more common o-ring measures approximately 1” inside diameter and about 1-1/8" outside diameter (approximately 1/16" thick). However, some models use the larger/thicker o-ring that measures approximately 25mm inside diameter, 31mm outside diameter, and 3mm thickness.
This o-ring is also used in some 12ga Citadel Boss Hog models. Again, please measure your old o-ring to confirm this is the correct one for your model.
Please check your Warthog's o-ring size before ordering. Most 12ga Citadel Warthogs use the standard o-ring. However, if you need the larger/thicker o-ring, please confirm with the photos above before ordering.
If you need the standard/more common o-ring size, it can be found in the link below:
This o-ring is also used in some 12ga Citadel Boss Hog models. Again, please measure your old o-ring to confirm this is the correct one for your model.
Please check your Warthog's o-ring size before ordering. Most 12ga Citadel Warthogs use the standard o-ring. However, if you need the larger/thicker o-ring, please confirm with the photos above before ordering.
If you need the standard/more common o-ring size, it can be found in the link below:
